Asphalt Company
Asphalt installation and replacement for driveways and paved areas, including proper base prep and grading for long-term performance.
Serving Minneapolis, Minnesota & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Protect your asphalt from Minnesota sun, water, and freeze-thaw wear with a clean, even seal coat, a clear scope, straightforward scheduling, and proper cure guidance.
If you searched for sealcoating near me, you want a contractor who can look at your pavement, tell you what it needs, and apply sealer under the right conditions. Minneapolis Sealcoating provides Minneapolis seal coating for residential driveways and light commercial asphalt, with an approach built around prep and cure time.
A good seal coat is not paint. It is a protective film that helps reduce oxidation from sun, slows water intrusion, and improves the look of the pavement. The results depend on what happens before the sealer goes down: cleaning, edging, masking where needed, and addressing cracks so they do not telegraph back through.
We focus on asphalt sealcoating in Minneapolis that fits local conditions. Spring and fall swings, sudden rain, and cool nights affect dry time and scheduling. We plan the work around the forecast and surface moisture so the coating can set up evenly and avoid tracking.
Asphalt installation and replacement for driveways and paved areas, including proper base prep and grading for long-term performance.
Residential driveway sealing with careful surface prep, clean edges, and clear guidance on cure time before traffic returns.
Ongoing commercial pavement maintenance plans to help lots stay presentable and reduce deterioration between major repairs.
Hot or cold crack filling and crack sealing options to keep water out and slow the spread of pavement damage.
Asphalt patching and pothole repairs to restore safer driving surfaces and prevent small failures from growing.
Professional pavement marking for stalls, arrows, and fire lanes to improve flow, visibility, and compliance needs.
We clean thoroughly, address vegetation at edges, and handle cracks and trouble spots so the sealer bonds instead of skating over dirt.
Your seal coat should look consistent. We apply at the right rate and keep edges tidy along concrete and landscaping.
Temperature, humidity, and surprise rain matter. We schedule asphalt sealing in Minneapolis around conditions that support proper cure.
You get straightforward direction on when to walk, drive, and park so the surface does not scuff or track.
From single driveways to small lots, we tailor the plan to traffic, turning areas, and where wear is concentrated.
Minneapolis Sealcoating is a local sealcoating contractor Minneapolis homeowners and property managers use when they want the job done with solid prep and straightforward communication. Our crews work with asphalt every day, so we can spot issues that affect results, including open cracks, raveled edges, low spots that hold water, and areas polished by turning tires.
You should expect a written scope, a realistic schedule, and a clean jobsite. We take care around garage aprons, sidewalks, and landscaping, and we plan traffic control for entrances and turning areas when the work is on a lot. If the pavement is not a good candidate for sealing right now, we will tell you what to fix first so your next seal coat actually lasts.
Visit us at 2010 E Hennepin Ave, Suite 4, Minneapolis, MN 55413.
Sealcoating in Minneapolis typically ranges from about $0.20 to $0.50 per square foot for most residential and light commercial work. A small one-car driveway often lands around $200 to $350, while larger driveways and small lots are commonly $500 to $1,500+ depending on layout and condition.
Final pricing depends on total square footage, crack filling needs, cleaning and prep time, access for equipment, edging detail, and how many coats are specified. The exact cost is confirmed after a site visit to measure, check pavement condition, and set cure-time expectations.
We measure the surface, check for cracking, raveling, and drainage issues, and outline what will be sealed and what should be repaired first.
We clean the pavement, cut in edges, and protect concrete, garage doors, and adjacent areas so the finish stays neat.
We fill or seal cracks as specified in the scope so water has fewer paths into the base.
We apply an even coat at the right spread rate and confirm when foot and vehicle traffic can return based on conditions.
If your asphalt looks gray, dry, or is starting to crack, get it evaluated now so you can seal at the right time and avoid premature wear.
Call for a Free EstimateWe provide sealcoating and asphalt maintenance across Minneapolis, with plans that match how each area's pavement is used and worn.
Book Your Free Inspection
Late spring through early fall is typically best because you need dry pavement and temperatures that support curing. We also plan around rain risk and cool nights, since both can extend dry time and affect the finish.
Yes, we handle residential driveways and light commercial surfaces. For lots, we plan traffic flow and curing so entrances, turning areas, and delivery paths are addressed without creating avoidable headaches for tenants or customers.
Cracks that are open should be addressed first because sealcoating alone will not stop water from getting into the pavement structure. During the site visit we identify which cracks should be filled or sealed and which areas may need patching instead.
Most sealed surfaces are ready for vehicle traffic within about 24 to 48 hours, depending on sun, humidity, and temperature. We give you a specific cure-time plan for your site so tires and kickstands do not mark the coating.
A quick site visit is the fastest way to get an accurate number because we can measure square footage, check edges and drainage, and note crack filling needs. Photos can help for a starting point, but measurements and condition drive the real scope.
Yes, and we can coordinate cure-time access and staging so residents know where to park and when to return. Clear communication matters most on shared drive lanes and small lots where a single blocked area can disrupt the whole property.
Tell us what you are sealing—driveway, small lot, or another asphalt surface—and what condition it is in. We will confirm prep needs, timing, and a written scope so you know exactly what to expect before work starts.